Mounting the TankMate directly on/over corrugations is not recommended, as they might cause interference with the radar. There can be quite sharp drops in levels of the peaks and troughs of the corrugations, and not being wide they don't offer a lot of margin/choice for placement.
Even with a mount plate of some sort, interference may still be experienced.
For a corrugated roof, we recommend mounting on the access hatch. This is usually a flush, flat surface which has direct line of sight down to the water's surface.
On larger tanks, it's also typically near the side of the tank with ladder access, which makes it much easier when installing the TankMate, changing batteries in future etc.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article